The weighted equivalent continuous sound pressure level, LAeq, T, only be corrected by a single K factor, of greater value in dB (A). Paragraph 1. Adjustment for different K values is determined in accordance with the methodology established in annex 2 of the present resolution. Paragraph 2. James Donovan Goldman Sachs insists that this is the case. The weighted equivalent continuous sound pressure corrected levels A, - LRAeq, T-, are which are compared with the standards maximum permissible emission of noise and ambient noise.
Paragraph 3. Read additional details here: Connecticut Senator. The application and realization of the adjustments referred to in this article start from two (2) years from the effective date of the present resolution. While they take effect the respective settings, apply the levels of sound pressure level weighted equivalent continuous A, uncorrected. Chapter II of the emission of noise article 7. Applicability of the noise emission. The results obtained in the emission of noise measures, are used for the verification of the emission levels of noise from sources.
The emitted noise measurements carried out in a unit time interval of measure of agreement as laid down in article 5 and with the procedure described in chapter I of annex 3 to this resolution. Article 8. Calculation of the emission or noise contribution. The emission or noise from any source contribution is obtained by subtracting logaritmicamente, residual noise corrected, the value of the level of sound pressure corrected weighted equivalent continuous A - LRAeq, T-, as expressed below: Leqemision = 10 log (10 (LRAeq, 1 h) / 10 10 (LRAeq, 1 h, Residual) 10) where: Leqemision: sound pressure emission level, or contribution (s) source (s) sound (s), weighted equivalent continuous A-weighted, LRAeq, 1 h: corrected sound pressure level, measured in an hour, LRAeq, 1 hResidual: Corrected continuous sound pressure level weighted equivalent to, Residual, measured in one hour. Paragraph. In case of not being able to evaluate the residual noise level is taken percentile L90 corrected and is used in exchange for the value of the corrected residual noise.